I created a circle-type LED fixture for the first time.
I set the pan movement angle to 540° in the fixture. It can be extended to 650°, but which one should I refer to?
Additionally, I have listed the maximum value for the color temperature.
https://www.glp.de/en/products/moving-l ... ression-x5
Please let me know if you have any suggestions or corrections.
GLP Impression-X5
-
Masatoshi
- Posts: 25
- Joined: Wed Apr 24, 2024 9:53 pm
- Location: japan
- Real Name: Masatoshi
- Attachments
-
GLP-Impression-X5.qxf- (75.62 KiB) Downloaded 97 times
-
GGGss
- Posts: 3319
- Joined: Mon Sep 12, 2016 7:15 pm
- Location: Belgium
- Real Name: Fredje Gallon
Since we don't have a visualiser, there is no need for different fixture definitions per type.
If you start working with v5, this might be a different case.
It's important to note that 540° will provide a more precise output than the 650° (degree resolution per step in the fine channel). In my experience, the 650° mode has demonstrated a higher likelihood of errors.
If you start working with v5, this might be a different case.
It's important to note that 540° will provide a more precise output than the 650° (degree resolution per step in the fine channel). In my experience, the 650° mode has demonstrated a higher likelihood of errors.
All electric machines work on smoke... when the smoke escapes... they don't work anymore
-
mcallegari
- Posts: 4932
- Joined: Sun Apr 12, 2015 9:09 am
- Location: Italy
- Real Name: Massimo Callegari
- Contact:
Added, thanks