Eurolite dmx512 pro mk2 issue on linux

[mdt]

Hi,

I've recently bought a Eurolite dmx512 pro mk2 to play with qlc+, as it was listed in the supported devices.

I tried to use it with some stairville par56 led lights, but they don't stop to flash , unless I put the red channel at max value.

I already tried a few things :

• the only driver which seems to work is, as announced, the Pro RX/TX

• tried 2 spots, just in case

• dmx termination plugged

• to up/down the frequency by adding this at the end of config file :

Code: Select all

[enttecdmxusbopen]
frequency=30

with frequency giong from 30 to 60.

System informations :

• Ubuntu 18.04

• kernel 4.15.0-36-lowlatency

• lspci : Bus 002 Device 012: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC

I'm ready to test a few things if it can helps.
I'm just playing with the console, pushing sliders by 'hand'.

[mcallegari]

Please see this.
I've done it mostly for Eurolite devices, so please try the latest OBS GIT build and see if it works better.

[mdt]

Guy, you *rocks* . seems to works much better ! at least with the console.

Letś play a it more. thanks !

[mdt]

Guy, you rocks, it now works as expected, and I can start playing with your awesome software !