hello and thank you for your help.
I finished the fixtures for my beam chinese 7r but when I want to put the power of the lamp I am forced to put the strobe on 255. for the lamp to be active. I can't find a solution to this and I ask for your help.
I attach my fixtures file as well as the instructions for the beam channels. I know that the color channels are different but it works very well.
thanking you.
olivier
intensity Moving head 7R beam
-
drivilo
- Posts: 10
- Joined: Sun Feb 25, 2024 6:58 pm
- Real Name: olivier
- Attachments
-
manuel moving head.pdf- (355.59 KiB) Downloaded 27 times
-
- Fieryzeal-Generic-beam-China-7R-beam 2.qxf
- (11.61 KiB) Downloaded 23 times
-
MichelSliepenbeek
- Posts: 844
- Joined: Wed Feb 08, 2023 10:24 am
- Location: Nederland
- Real Name: Michel Sliepenbeek
I can't find a solution to this and I ask for your help.
It does exactly what is described in the manual.
So there is nothing wrong, it only might be different from what you expected.
The easiest solution is to change your expectation (i.o.w. "get used to it"
). If you can't, you could use a Channel Modifier like this:
- Blip Top & Bottom.qxmt
- (542 Bytes) Downloaded 22 times
It will change DMX values 000 .. 003 to 255 and values 253 .. 255 to 000.
So basically "Open" and "Close" will change position.
A QLC Workspace is like a Bob Ross painting: "it's your world, you can create whatever you want!"