Web Interface Question

Archive of the non-categorized posts related to the QLC+ technical support.
Please do not create new threads here, instead, use the categories above !
Post Reply
conradcliff
Posts: 48
Joined: Wed Jan 20, 2016 12:35 am
Real Name: Clifford Conrad Sumner

Hey there, hope I'm posting in the right location..couldn't find a general questions forum.
I'm trying to run a show with a few sound effects and some simple lighting.
I want to do this remotely and as I don't think there is an android interface I was thinking perhaps the web interface would work.
I see that it is still under dev though and just want to make sure that there's no way to do it.

Thanks for any help and sorry if this is a dumb question.. :)
Top
Krsound
Posts: 142
Joined: Sun May 31, 2015 4:42 am
Location: USA
Real Name: Kyle Sims
Contact:
Contact Krsound

Your simple lighting it's possible, far as the show you can cue a show but you can't edit a show with the web interface. The web interface is only the virtual console so you must set that up first then your set in help tells you how to set up the web interface and virtual console with buttons sliders ect.
Top
User avatar
mcallegari
Posts: 4933
Joined: Sun Apr 12, 2015 9:09 am
Location: Italy
Real Name: Massimo Callegari
Contact:
Contact mcallegari

The web interface is only the virtual console ...
Not true.
The web interface includes also the Simple Desk and the Input/Output configuration, together with custom fixtures loading.
Top
conradcliff
Posts: 48
Joined: Wed Jan 20, 2016 12:35 am
Real Name: Clifford Conrad Sumner

Ok, super awesome! Thank you so much for the reply to a question I could have found the answer to by simply reading the documentation! :mrgreen:
I'm going to look into this today.

Thanks again!
Top
joky
Posts: 18
Joined: Tue Jul 07, 2015 5:18 pm
Real Name:

hi,

If you plan to control your show from android you may take a look at OSC. I use touchOSC with a interface easily designed with the osc editor. you just need the correct IP and Port of your qlc+ and autpdetect each input and you have a very simple and bullet proof Interface customized to your needs.

the web interface has the advantage to wor just out of the box without setting up additional software but it may not work as smooth on your mobile browser as it does on a desktop PC.

regards
Top
conradcliff
Posts: 48
Joined: Wed Jan 20, 2016 12:35 am
Real Name: Clifford Conrad Sumner

joky wrote:hi,

If you plan to control your show from android you may take a look at OSC. I use touchOSC with a interface easily designed with the osc editor. you just need the correct IP and Port of your qlc+ and autpdetect each input and you have a very simple and bullet proof Interface customized to your needs.

the web interface has the advantage to wor just out of the box without setting up additional software but it may not work as smooth on your mobile browser as it does on a desktop PC.

regards
That is great info, I will definitely be looking into that. Thank you so much!
Top
Post Reply

Return to “Archive - no new threads please”